The Queens Award winning Andrews Water Heater range of MAXXflo condensing water heaters offers a revolutionary concept in self contained, storage water heating for commercial applications. Featuring stainless steel tanks, these high efficiency water heaters incorporate a fully modulating burner function to provide maximum performance combined with economic running costs.
Heat input and water flow are carefully regulated to produce a closely controlled water temperature
and our design principle affords protection against Legionella bacteria. Virtually instantaneous hot water is available since the heat exchanger(s) is sited externally to the storage tank.
The MAXXflo range of condensing water heaters offers tank options of 100, 200 and 300 litres capacity, and a choice of 9 sizes from 30 to120kW to provide numerous solutions for both commercial and industrial applications. The small footprint and multiple flue options enable the heater to be installed in unusually problematical locations.
The high efficiency heat exchanger, modulating burners and tank design allow the MAXXflo to generate hot water in the condensing mode up to 80% of the tank volume producing an efficiency of 109%. These products can be installed as room sealed balanced flue appliances using concentric flue components supplied by Andrews Water Heaters. Alternatively conventional flue components can be used (suitable for condensing appliances) giving a longer flue run.
A digital electronic controller operates the pre-mix fully modulating gas burners fitted to each of the heater modules. The tank temperature, up to 70ºC, is set on the master control and BEMS and other external interfaces are provided. The MAXXflo water heaters are suitable for unvented systems only and a kit is supplied as standard. The temperature and pressure relief valves are factory fitted.
- Condensing, 109% net efficiency
- 100, 200 or 300 litre stainless steel tank, passivated with convex base
- Single bottom drain
- Large clean out opening in tank top
- Variable speed pump(s)
- Pre-mix modulating gas burner(s)
- Room sealed or conventional flue
- State of the art electronics with diagnostics
- Built-in anti-Legionella function
- Secondary pump run and temperature control
- BEMS interface
- Qualified for Energy Technology List (ETL)
- ECA & WRAS approved
- Winner of the Queens Award for Enterprise: Innovation 2007
This high efficiency range is suitable for use with LZC SOLARflo renewable products.